Skip to main contentSkip to footer
Škoda Accessories Ireland
Complete tow bar set
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the model and the equipment specification (five-seater, seven-seater, etc.). For fitting, the following items must also be ordered from the ŠKODA Original Components catalogue: Aerial for the virtual pedal (if fitted) x 1 / 565 962 235 Cover for switch – for five-seater version x 1 / 565 868 345B 9B9 Cover for switch – for seven-seater version x 1 / 565 868 345 9B9 Support – for seven-seater version x 1 / 565 867 993 Double-sided adhesive tape x 1 / D 438 P11 M4 Activator x 1 / D 822 150 A1 Adhesive x 1 / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658G - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: This component is compatible with the electronic system in vehicles manufactured in Russia (Kaluga, Nizhny Novgorod) until CW 50/2019. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
For the basic models with either left- or right-hand drive, manufactured from CW 38/2018 until CW 48/2019. It cannot be used for seven-seater vehicles that have TDI engines and manual transmission MQ. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. It cannot be used for vehicles exported to Australia.
  • Kodiaq (2017-2023)
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the model and the equipment specification (five-seater, seven-seater, etc.). For fitting, the following items must also be ordered from the ŠKODA Original Components catalogue: Aerial for the virtual pedal (if fitted) x 1 / 565 962 235 Cover for switch – for five-seater version x 1 / 565 868 345B 9B9 Cover for switch – for seven-seater version x 1 / 565 868 345 9B9 Support – for seven-seater version x 1 / 565 867 993 Double-sided adhesive tape x 1 / D 438 P11 M4 Activator x 1 / D 822 150 A1 Adhesive x 1 / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658G - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: This component is compatible with the electronic system in vehicles manufactured in Russia (Kaluga, Nizhny Novgorod) until CW 50/2019. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
For the basic models with either left- or right-hand drive, manufactured from CW 38/2018 until CW 48/2019. It cannot be used for seven-seater vehicles that have TDI engines and manual transmission MQ. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. It cannot be used for vehicles exported to Australia.
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the model and the equipment specification (five-seater, seven-seater, etc.). For fitting, the following items must also be ordered from the ŠKODA Original Components catalogue: Aerial for the virtual pedal (if fitted) x 1 / 565 962 235 Cover for switch – for five-seater version x 1 / 565 868 345B 9B9 Cover for switch – for seven-seater version x 1 / 565 868 345 9B9 Support – for seven-seater version x 1 / 565 867 993 Double-sided adhesive tape x 1 / D 438 P11 M4 Activator x 1 / D 822 150 A1 Adhesive x 1 / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658G - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: This component is compatible with the electronic system in vehicles manufactured in Russia (Kaluga, Nizhny Novgorod) until CW 50/2019. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
For the basic models with either left- or right-hand drive, manufactured from CW 38/2018 until CW 48/2019. It cannot be used for seven-seater vehicles that have TDI engines and manual transmission MQ. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. It cannot be used for vehicles exported to Australia.
  • Kodiaq (2017-2023)
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the model and the equipment specification (five-seater, seven-seater, etc.). For fitting, the following items must also be ordered from the ŠKODA Original Components catalogue: Aerial for the virtual pedal (if fitted) x 1 / 565 962 235 Cover for switch – for five-seater version x 1 / 565 868 345B 9B9 Cover for switch – for seven-seater version x 1 / 565 868 345 9B9 Support – for seven-seater version x 1 / 565 867 993 Double-sided adhesive tape x 1 / D 438 P11 M4 Activator x 1 / D 822 150 A1 Adhesive x 1 / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658G - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: This component is compatible with the electronic system in vehicles manufactured in Russia (Kaluga, Nizhny Novgorod) until CW 50/2019. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
For the basic models with either left- or right-hand drive, manufactured from CW 38/2018 until CW 48/2019. It cannot be used for seven-seater vehicles that have TDI engines and manual transmission MQ. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. It cannot be used for vehicles exported to Australia.

Recommendations Teaser

*RRP = Recommended Retail Price; Škoda partner prices may vary; additional costs may be incurred due to installation and necessary Škoda Genuine Parts.