Skip to main contentSkip to footer
Škoda Accessories Ireland
Complete tow bar set
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the equipment specification (five-seater, seven-seater). For fitting, the following items must be ordered from the ŠKODA Genuine Parts catalogue: Aerial for the virtual pedal (if fitted) (1) / 565 962 235 Switch cover – for the five-seater variant (1) / 565 868 345B 9B9 Switch cover – for the seven-seater variant (1) / 565 868 345 9B9 Support – for the seven-seater variant (1) / 565 867 993 Double-sided adhesive tape (1) / D 438 P11 M4 Activator (1) / D 822 150 A1 Adhesive (1) / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658F - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: Wiring harness Ordering No. 565 971 658F can be used only for vehicles produced until CW 38/2018. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
Exclusively for the basic model of left-hand and right-hand drive ŠKODA KODIAQ (NS) vehicles produced until CW 38/2018. Not available for seven-seater vehicles with TDI engines with manual transmission. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. Cannot be used for vehicles exported to Australia.
  • Kodiaq (2017-2023)
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the equipment specification (five-seater, seven-seater). For fitting, the following items must be ordered from the ŠKODA Genuine Parts catalogue: Aerial for the virtual pedal (if fitted) (1) / 565 962 235 Switch cover – for the five-seater variant (1) / 565 868 345B 9B9 Switch cover – for the seven-seater variant (1) / 565 868 345 9B9 Support – for the seven-seater variant (1) / 565 867 993 Double-sided adhesive tape (1) / D 438 P11 M4 Activator (1) / D 822 150 A1 Adhesive (1) / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658F - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: Wiring harness Ordering No. 565 971 658F can be used only for vehicles produced until CW 38/2018. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
Exclusively for the basic model of left-hand and right-hand drive ŠKODA KODIAQ (NS) vehicles produced until CW 38/2018. Not available for seven-seater vehicles with TDI engines with manual transmission. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. Cannot be used for vehicles exported to Australia.
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the equipment specification (five-seater, seven-seater). For fitting, the following items must be ordered from the ŠKODA Genuine Parts catalogue: Aerial for the virtual pedal (if fitted) (1) / 565 962 235 Switch cover – for the five-seater variant (1) / 565 868 345B 9B9 Switch cover – for the seven-seater variant (1) / 565 868 345 9B9 Support – for the seven-seater variant (1) / 565 867 993 Double-sided adhesive tape (1) / D 438 P11 M4 Activator (1) / D 822 150 A1 Adhesive (1) / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658F - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: Wiring harness Ordering No. 565 971 658F can be used only for vehicles produced until CW 38/2018. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
Exclusively for the basic model of left-hand and right-hand drive ŠKODA KODIAQ (NS) vehicles produced until CW 38/2018. Not available for seven-seater vehicles with TDI engines with manual transmission. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. Cannot be used for vehicles exported to Australia.
  • Kodiaq (2017-2023)
Manufactured from high-quality materials, the tow bar has undergone load tests as well as rigorous testing for strength and resistance to corrosion. The tow bar complies with homologation E1 55R-01 2601 and all Czech and international regulations. Please refer to the Owner's Manual for detailed instructions on how to use the ball hitch. Retrofitting a tow bar to your vehicle increases the demand on its cooling system. As a result, depending on the equipment fitted to the vehicle, the cooling system components will need to be replaced in accordance with the information either held by workshop technicians in authorised ŠKODA AUTO specialist service centres or available in B2B. * The time units specified for the fitting time serve only as a guide and are dependent on the equipment specification (five-seater, seven-seater). For fitting, the following items must be ordered from the ŠKODA Genuine Parts catalogue: Aerial for the virtual pedal (if fitted) (1) / 565 962 235 Switch cover – for the five-seater variant (1) / 565 868 345B 9B9 Switch cover – for the seven-seater variant (1) / 565 868 345 9B9 Support – for the seven-seater variant (1) / 565 867 993 Double-sided adhesive tape (1) / D 438 P11 M4 Activator (1) / D 822 150 A1 Adhesive (1) / D 001 210 M2 - for vehicles not set up for a tow bar, additionally: Wiring harness for vehicles not set up for a tow bar / 565 971 658F - for vehicles produced from CW 27/2018 without a tow bar preparation and with a heated steering wheel, additionally: Wiring harness / 57A 971 658G. Please note: Wiring harness Ordering No. 565 971 658F can be used only for vehicles produced until CW 38/2018. Associated products: Adapter (from the 13-pin to the 7-pin socket) / EAZ 000 001A
Color: Black Weight: 25 kg Dimensions: 1390 x 690 x 250 mm Material: High-quality steel
Exclusively for the basic model of left-hand and right-hand drive ŠKODA KODIAQ (NS) vehicles produced until CW 38/2018. Not available for seven-seater vehicles with TDI engines with manual transmission. For KODIAQ RS (2,0 176 kW) it can be fitted only with tow bar preparation from the production line. Cannot be used for vehicles exported to Australia.

Recommendations Teaser

*RRP = Recommended Retail Price; Škoda partner prices may vary; additional costs may be incurred due to installation and necessary Škoda Genuine Parts.